Structural characteristics
- The maximum rotation Angle of each section is 45°.
- Connect greater shaft spacing.
- Finished hole tolerance is H7, keyway, hexagonal hole and square hole can also be cut according to requirements.
- Calculation of installation lengths L and X(travel) :
- Travel X≤(Lmax- 2.L2-b)/2Lmin >(Lmax+2.L+B)/2
- Minimum size Lmin=L2+B+X+L2.
Product Parameters
Model |
category |
Material |
Surface treatment |
attachment |
CPSP |
Short hole telescopic type |
42Crmo |
Blackening, nickel plating, zinc plating, chrome plating |
setscrew |
Usually, the surface treatment adopts conventional blackening treatment, which can accept non-standard customization and special material customization to meet special working conditions. |
Model |
Nominal torque N.m |
D1,d2(H7) |
D |
L2 |
C |
Lmin/Lmax |
B |
Bjs9 |
T |
W(h8) |
F(h8) |
Spline groove |
CPSP-03GA |
25 |
10 |
22 |
48 |
12 |
Based on user requirements |
30 |
3 |
11.4 |
10 |
10 |
11×14-Z6 |
Note: The inner hole at both ends of the coupling is composed of small to large inner diameter free, the inner hole uses H7/H8 standard tolerance processing, the inner diameter size marked in the table is for reference only, can be customized according to the user's special requirements, please contact the salesman and related technicians for details.
specification |
Size Lmin/Lmax= standard length |
CPSP-03GA |
140/170 |
160/200 |
180/240 |
230/330 |
- |
- |
- |
- |
- |